5 Minutes Work To Exchange Your IPhone 6 Plus Broken Screen

For the reason that display screen of iPhone 6 plus has been enlarged to 5.5 inches, the opportunity of breaking it has additionally been enlarged. If unfortunately you broke your iPhone 6 plus display screen, official repair will price you as much as per week exclude the time you make the appointment. So if you are expert enough, replacing the iPhone replacement screen 6 plus broken display screen yourself is a greater alternative. Right here we are going to stroll you through a 5 minutes DIY restore guide for replacing the broken iPhone 6 plus broken display.

Cracked the iPhone 6 display? No worry! Just observe this step by step iPhone 6 display screen replacement information, it's solely a 10 mins work!

Please be aware: This course of was carried out by our specialists who've years of experience of take apart telephones, and we used the part which have already got those small parts pre-assembled. This publish is under no circumstances a reference for these who're skilled sufficient to restore their iPhone 6+, do that at your individual risk, etradesupply won't be accountable for any injury occurred through the restore course of.

Instruments Wanted:
Pentalobe Screwdriver
PH00 Philip Screwdriver
A Pair of Tweezers
Suction Cup Software
Case Opening Device

Step 1. Shut down your iPhone 6 plus before you do anything. (Be sure you’ve completed this before the disassembly begins, or you may cause brief circuit of the inner components of the phone which can harm the motherboard)

Step 2. Undo 2 screws on the underside with the assistance of the Pentalobe Screwdriver. (We recommend you to use a magnetic pad for placing these screws in case dropping them)

Step 3. Stick the suction cup on the bottom of the telephone after which pull out the broken display screen. (In case your screen has already shattered badly, use clear adhesive tape to cowl the surface of the display to avoid any additional damage)

Step 4. Undo 5 screws holding the metallic cover, then take the metallic cover out.

Step 5. Disconnect the digitizer flex cable connector, LCD display flex cable connector, entrance going through camera connector and residence button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD screen meeting with residence button, body and entrance facing digicam, then you definately just want to place the new one on)

Step 6. Undo the 3 screws holding the house button retaining bracket then pick it up.

Step 7. Pry up the home button flex cable connector then take away the house button.

Step 8. Undo the 3 screws that holding the steel cover on the ear speaker.

Step 9. Take out the retaining bracket, ear speaker and entrance going through digicam.

Step 10. Undo the 7 screws that locking the LCD steel plate.

Step 11. Pry up the LCD back plate connector.

Step 12. Substitute your broken screen with the brand new one.

Word: We strongly recommend you to check the function of the new iPhone 6 plus digitizer and LCD screen meeting before you set up it on. If you sadly get the defective half, you may ask your supplier to alternate for a new one.